| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Schneider Electric Modicon TM221CE16R 1.3.3.3 devices allow remote attackers to discover the application-protection password via a \x00\x01\x00\x00\x00\x05\x01\x5a\x00\x03\x00 request to the Modbus port (502/tcp). Subsequently the application may be arbitrarily downloaded, modified, and uploaded. |
| A CWE-200: Information Exposure vulnerability exists in Modicon Controllers (M340 CPUs, M340 communication modules, Premium CPUs, Premium communication modules, Quantum CPUs, Quantum communication modules - see security notification for specific versions), which could cause the disclosure of FTP hardcoded credentials when using the Web server of the controller on an unsecure network. |
| An information disclosure vulnerability exists in AMD Platform Security Processor (PSP) chipset driver. The discretionary access control list (DACL) may allow low privileged users to open a handle and send requests to the driver resulting in a potential data leak from uninitialized physical pages. |
| Error handling in the SSH protocol in (1) SSH Tectia Client and Server and Connector 4.0 through 4.4.11, 5.0 through 5.2.4, and 5.3 through 5.3.8; Client and Server and ConnectSecure 6.0 through 6.0.4; Server for Linux on IBM System z 6.0.4; Server for IBM z/OS 5.5.1 and earlier, 6.0.0, and 6.0.1; and Client 4.0-J through 4.3.3-J and 4.0-K through 4.3.10-K; and (2) OpenSSH 4.7p1 and possibly other versions, when using a block cipher algorithm in Cipher Block Chaining (CBC) mode, makes it easier for remote attackers to recover certain plaintext data from an arbitrary block of ciphertext in an SSH session via unknown vectors. |
| The default configuration of BEA WebLogic Server and Express 8.1 SP2 and earlier, 7.0 SP4 and earlier, 6.1 through SP6, and 5.1 through SP13 responds to the HTTP TRACE request, which can allow remote attackers to steal information using cross-site tracing (XST) attacks in applications that are vulnerable to cross-site scripting. |
| The undocumented TRACK method in Microsoft Internet Information Services (IIS) 5.0 returns the content of the original request in the body of the response, which makes it easier for remote attackers to steal cookies and authentication credentials, or bypass the HttpOnly protection mechanism, by using TRACK to read the contents of the HTTP headers that are returned in the response, a technique that is similar to cross-site tracing (XST) using HTTP TRACE. |
| The RPC portmapper service is running. |
| ICMP information such as (1) netmask and (2) timestamp is allowed from arbitrary hosts. |
| An SNMP community name is the default (e.g. public), null, or missing. |
| IP forwarding is enabled on a machine which is not a router or firewall. |
| Systems with microprocessors utilizing speculative execution and branch prediction may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. |
| Systems with microprocessors utilizing speculative execution and indirect branch prediction may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis of the data cache. |
| The Active Template Library (ATL) in Microsoft Visual Studio .NET 2003 SP1, Visual Studio 2005 SP1 and 2008 Gold and SP1, and Visual C++ 2005 SP1 and 2008 Gold and SP1 does not properly enforce string termination, which allows remote attackers to obtain sensitive information via a crafted HTML document with an ATL (1) component or (2) control that triggers a buffer over-read, related to ATL headers and buffer allocation, aka "ATL Null String Vulnerability." |
| Xen allows guest OS users to obtain sensitive information from uninitialized locations in host OS kernel memory by not enabling memory and I/O decoding control bits. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-0777. |
| Exposure of HTTP Authentication Header to unexpected hosts during WebSocket authentication vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.21, from 10.1.0-M1 through 10.1.54, from 9.0.2 through 9.0.117, from 8.5.24 through 8.5.100, from 7.0.83 through 7.0.109.
Users are recommended to upgrade to version 11.0.22, 10.1.55 or 9.0.118, which fix the issue. |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available. |
| Backstage is an open framework for building developer portals. Prior to 3.1.5, authenticated users with permission to execute scaffolder dry-runs can gain access to server-configured environment secrets through the dry-run API response. Secrets are properly redacted in log output but not in all parts of the response payload. Deployments that have configured scaffolder.defaultEnvironment.secrets are affected. This is patched in @backstage/plugin-scaffolder-backend version 3.1.5. |
| dataTaker DT80 dEX 1.50.012 allows remote attackers to obtain sensitive credential and configuration information via a direct request for the /services/getFile.cmd?userfile=config.xml URI. |
| A script imports issue was addressed with improved isolation. This issue is fixed in Safari 18.4, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, visionOS 2.4. Visiting a website may leak sensitive data. |
| This issue was addressed with improved handling of symlinks. This issue is fixed in macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5. An app may be able to access protected user data. |
