| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out of bounds write in V8 in Google Chrome prior to 156.0.8078.79 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| An out-of-bounds read and write in NTS client extension field parsing (extens_client_recv) in NTPsec before 1.2.5 allows a remote attacker who can send NTP server-mode replies to an NTS client to corrupt heap memory and crash ntpd, and, combined with the NTS-KE client out-of-bounds read fixed in 1.2.4, to bypass NTS authentication and set the client's time, via an NTS Authenticator and Encrypted Extension Fields field whose nonce length exceeds the field. |
| SQLite before 3.54.0 built with FTS5 contains a heap buffer overflow in fts5DoSecureDelete() that allows attackers to write past the leaf page buffer via crafted footer key offsets. Attackers can supply a database file with a corrupted FTS5 index that, when deleted from with secure-delete enabled, corrupts heap memory and crashes the application. |
| SQLite before 3.54.0 built with the session extension contains a heap buffer overflow vulnerability in sqlite3changeset_apply() that allows attackers to corrupt heap memory by supplying crafted changesets. Attackers can repeat a table name in a second changeset block with a larger column count, causing sessionUpdateFind() to memset past the undersized aUpdateMask allocation. |
| Several psqlODBC entry points use an application-supplied column number or row index as an array index without validating it. SQLBindCol with a column number above 32767 wraps the binding count negative and a later copy runs off the array. A negative SQL_DESC_COUNT on an application row descriptor unbinds columns at negative indexes. SQLColAttribute with a very large column number uses a negative index. SQLSetPos(SQL_ADD) does not check the row number against the rowset size. An application that forwards untrusted column or row numbers exposes its process to out-of-bounds reads and writes. Versions before psqlODBC 18.00.0006 are affected. |
| When psqlODBC quotes a schema or table name into a 128-byte stack buffer, its length check lets it write up to two bytes past the end of the buffer for a long name. The names come from the application's SQL text: the table of a statement the driver parses to describe its columns, and the target of the last INSERT when the driver rewrites SELECT @@IDENTITY. In the @@IDENTITY rewrite, a column name sent by the server can also write one byte past the buffer. The bytes written past the buffer are a double quote and a NUL. An application that forwards untrusted SQL text to the driver exposes its process to stack corruption. Versions before psqlODBC 18.00.0006 are affected. |
| libexpat through 2.9.0 contains a signed integer overflow vulnerability in storeAtts() in lib/xmlparse.c that allows attackers to trigger out-of-bounds writes via oversized attribute counts. Attackers can supply a multi-gigabyte document with a start tag carrying over 2^30 attributes to overflow attIndex and nPrefixes, crashing applications or corrupting heap memory. |
| A vulnerability in mkv::event_thread_t in VideoLAN VLC media player 3.0.7.1 allows remote attackers to trigger a heap-based buffer overflow via a crafted .mkv file. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix memory corruption with small endpoint
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mxuport: fix memory corruption with small endpoint
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix memory corruption with small endpoints
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: safe_serial: fix memory corruption with small endpoint
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: fix memory corruption with small endpoint
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: validate connector number in ucsi_connector_change()
The connector number in a UCSI CCI notification is a 7-bit field
supplied by the PPM. ucsi_connector_change() uses it to index the
ucsi->connector[] array without checking it against the number of
connectors the PPM reported at init time, so a buggy or malicious PPM
(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
glink transports) can drive schedule_work() on memory past the end of
the array.
Reject connector numbers that are zero or exceed cap.num_connectors
before dereferencing the array. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
When a configuration file provides an object size that is larger than the
driver's known mxt_obj_size(object), the driver intends to discard the
extra bytes.
The loop iterates using for (i = 0; i < size; i++). Inside the loop, the
condition to skip processing extra bytes is:
if (i > mxt_obj_size(object))
continue;
Since i is a 0-based index, the valid indices for the object are 0 through
mxt_obj_size(object) - 1.
When i == mxt_obj_size(object), the condition evaluates to false, and the
code processes the byte instead of discarding it.
This causes the code to calculate byte_offset = reg + i - cfg->start_ofs
and writes the byte there, overwriting exactly one byte of the adjacent
instance or object.
Update the boundary check to skip extra bytes correctly by using >=. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: omninet: fix memory corruption with small endpoint
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory corruption by not reinjecting CK machine checks
Channel-subsystem damage machine checks are for the host channel
subsystem. The guest channel subsystem is emulated in the userspace VMM.
There is no point in forwarding such machine checks into the guest.
This also simplifies the machine check reinjection and avoids kfree of a
stack variable as reported by sashiko. There might be still machine
checks that have the ck bit set with another bit (like instruction
damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and
ED bits already are. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix out-of-bounds write when null terminating a label vec
aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE
is passed. If the components are all distinct no duplicates are dropped,
dups is 0 and the terminator goes to vec[n], so the caller has to provide
room for n + 1 entries.
aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len,
gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but
vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES
it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it
allocates exactly len pointers. The terminator therefore lands one entry
past the end of the local array when len is LOCAL_VEC_ENTRIES, and one
entry past the end of the allocation when len is larger.
len comes from the number of "//&" separated components in the label name
and label_count_strn_entries() does not bound it. An unprivileged task
reaches the parse by writing to /proc/self/attr/apparmor/current or through
lsm_set_self_attr(2), both of which go through do_setattr(), and the name
is parsed before the change_profile permission is checked.
The query_label() path behind the securityfs .access file, which is
mode 0666, performs no permission check at all. Every component has to
resolve to a loaded profile, so a system with policy loaded is required.
The other two VEC_FLAG_TERMINATE users work on a label vec that
aa_label_alloc() has already sized with "+ 1 for null terminator entry on
vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing
len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of
the local array and into kzalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: size fh_verify server sockaddr slot by xpt_locallen
The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the
server sockaddr slot sized by xpt_remotelen but fill it from
xpt_local using xpt_locallen:
TP_STRUCT__entry(
...
__sockaddr(server, rqstp->rq_xprt->xpt_remotelen)
...
)
TP_fast_assign(
...
__assign_sockaddr(server, &rqstp->rq_xprt->xpt_local,
rqstp->rq_xprt->xpt_locallen);
...
)
When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy
writes past the reserved ring-buffer slot. In the reverse direction
(xpt_locallen < xpt_remotelen) the slot is oversized and the
unwritten tail leaks prior ring-buffer contents to trace consumers.
The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote()
is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from
the RDMA connect path; svc_create_socket() for UDP calls only
svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's
lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request
then copies 16 or 28 bytes from xpt_local into a zero-byte slot.
The other NFSD tracepoints that record the server address
(NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS,
SVC_RQST_ENDPOINT_FIELDS) already size the server slot by
xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only
exceptions.
Fix by sizing the server slot with xpt_locallen so the declared slot
matches the copy length. The client slot and its assignment already
agree on xpt_remotelen and are left untouched. |
