| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the 7z file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in 7z files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains 7z content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| Use after free in Microsoft Edge (Chromium-based) allows an authorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: layouts: onie-tlv: fix hang on unknown types
The EEPROM on my board has a vendor specific entry of type 0x41. When
stumbling upon that, this driver hangs in an endless loop.
Fix it by keep incrementing the offset on unknown entries, so the loop
will eventually stop. |
| Ocelot through 24.1.0, fixed in commit f156fd4, contains a security control bypass vulnerability that allows denied clients to circumvent IP-based access restrictions by sending WebSocket upgrade requests. The WebSocket upgrade pipeline branch configured via MapWhen in OcelotPipelineExtensions.cs omits SecurityMiddleware, causing requests from blocked IP addresses to be proxied to downstream services without enforcement of the configured allow/block list. |
| In Eclipse Mosquitto versions 2.0.7 and earlier, the server will crash if the client tries to send a PUBLISH packet with topic length = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow
Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from
VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in
__switch_to(). The read uses ldr, but the KASAN shadow address is
byte-granular and is not guaranteed to be word aligned.
ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and
CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to()
with an alignment exception before reaching init.
Use ldrb for the dummy shadow access. The code only needs to fault in the
shadow mapping if the stack shadow is missing, so a byte load is sufficient
and matches the granularity of KASAN shadow memory. |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock
During the SSR/PDR down notification the tx_lock is taken with the
intent to provide synchronization with active DMA transfers.
But during this period qcom_slim_ngd_down() is invoked, which ends up in
slim_report_absent(), which takes the slim_controller lock. In multiple
other codepaths these two locks are taken in the opposite order (i.e.
slim_controller then tx_lock).
The result is a lockdep splat, and a possible deadlock:
rprocctl/449 is trying to acquire lock:
ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus
but task is already holding lock:
ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl
which lock already depends on the new lock.
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ctrl->tx_lock);
lock(&ctrl->lock);
lock(&ctrl->tx_lock);
lock(&ctrl->lock);
The assumption is that the comment refers to the desire to not call
qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction.
But any such transaction is initiated and completed within a single
qcom_slim_ngd_xfer_msg().
Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn
down, all child devices are notified that the slimbus is gone and the
child devices are removed.
Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: qcom-cci: Fix NULL pointer dereference in cci_remove()
On all modern platforms Qualcomm CCI controller provides two I2C masters,
and on particular boards only one I2C master may be initialized, and in
such cases the device unbinding or driver removal causes a NULL pointer
dereference, because cci_halt() is called for all two I2C masters, but
a completion is initialized only for the single enabled master:
% rmmod i2c-qcom-cci
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<snip>
Call trace:
__wait_for_common+0x194/0x1a8 (P)
wait_for_completion_timeout+0x20/0x2c
cci_remove+0xc4/0x138 [i2c_qcom_cci]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci]
.... |
| Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Entra ID allows an authorized attacker to perform spoofing over a network. |
| Heap-based buffer overflow in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| A command injection vulnerability was identified in TP-Link TL-WR802N v4, TL-WR841N v14, and TL-WR840N v6 due to improper neutralization of special elements used in an OS command. In the router configuration import function allows an authenticated attacker to upload a crafted configuration file that results in execution of OS commands with root privileges during port-trigger processing.
Successful exploitation allows an authenticated attacker to execute system commands with root privileges, leading to full device compromise. |
| OpenZiti through 2.0.0, fixed in commit 3027fdf, contains a privilege escalation vulnerability that allows authenticated non-admin identities with fine-grained enrollment management permissions to create enrollments for any identity, including the default administrator, because the ApplyCreate function in controller/model/enrollment_manager.go verifies only that the target identity exists without performing authorization checks binding the caller to the target identity. Attackers can redeem the resulting one-time token through the unauthenticated client API enrollment endpoint to obtain a client certificate authenticating as the targeted admin identity, yielding full administrative control of the controller and the zero-trust overlay it manages. |
| IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated attackers to execute arbitrary OS commands and read sensitive files including credentials, enabling complete system compromise and lateral movement. |
| SeaweedFS before 4.30 reflects the callback query parameter verbatim into responses served with Content-Type application/javascript in the shared writeJson helper (weed/server/common.go), with no callback-name validation, no X-Content-Type-Options: nosniff header, and no CORS allow-list. Every JSON endpoint that uses writeJson - including the unauthenticated master endpoints /dir/status, /dir/lookup and /cluster/status, the volume server /status, and the filer directory listing, all reachable in the default configuration (no -whiteList, no security.toml, bound to 0.0.0.0) - can therefore be loaded cross-origin via a script tag with a chosen callback, letting a third-party web page read cluster topology, volume server URLs and gRPC ports, file identifiers, and directory listings. Because the callback string is reflected at the start of the body and no nosniff header is sent, MIME-sniffing clients may also interpret the reflected content as HTML. |
| OpenBMB ChatDev through 2.2.0, fixed in commit 4fd4da6, contains a path traversal vulnerability that allows unauthenticated remote attackers to write or delete arbitrary files by supplying a malicious multipart filename in the file upload endpoint. Attackers can send a crafted filename containing path traversal sequences or an absolute path to the POST uploads session endpoint, which constructs the destination path without sanitization in save_upload_file, causing file write and cleanup operations to target attacker-chosen paths on the server filesystem. |
| yudao-cloud before 2026.06 contains a broken access control vulnerability in the BPM module that allows any authenticated user to access arbitrary process instance records by supplying a caller-controlled process-instance identifier to an unprotected endpoint lacking the @PreAuthorize annotation. Attackers can query any process-instance identifier through the unguarded GET endpoint to read sensitive workflow data including submitted form variables, approver identities, approval and rejection comments, and process BPMN XML without ownership or tenant party verification. |
| JimuReport through 2.5.0 exposes the POST /jmreport/auto/export endpoint without authentication: the handler is annotated @JimuNoLoginRequired, so JimuReportTokenInterceptor skips all authentication and authorization, and the export service streams the rendered report for any supplied report id without verifying the auto-export configuration flag. An unauthenticated remote attacker can enumerate Snowflake report identifiers and export the full contents of any report, including the data returned by the report configured SQL queries and any credentials embedded in its data sources. |
| RuoYi-Vue-Plus through 5.6.2, fixed in commit 88d03d9, exposes workflow task management endpoints under /workflow/task (FlwTaskController) without any permission check: the controller declares no class-level or method-level authorization annotation, so the endpoints are gated only by global authentication. Any authenticated user, regardless of assigned role, can therefore reassign workflow approval tasks to arbitrary users via updateAssignee (defeating segregation of duties in the approval process), urge arbitrary tasks, and enumerate all pending and finished tasks via the pageByAllTaskWait and pageByAllTaskFinish listing endpoints. The issue was resolved by adding permission identifiers (SaCheckPermission) to these endpoints. |
| Vibe-Trading before 0.1.10 contains a DNS rebinding authentication bypass vulnerability that allows remote attackers to bypass bearer-token authentication by exploiting the server's trust of TCP peer addresses for loopback clients combined with missing Host header validation while binding to 0.0.0.0 with credentialed CORS. Attackers can craft a malicious DNS rebinding page to issue authenticated requests to the local API server, reach the shell execution endpoint with a bash-enabled preset, and achieve remote code execution as the API process user while also overwriting LLM and data-source settings to exfiltrate credentials. |
| Invoice Ninja through 5.13.26 contains an open redirect vulnerability in the client portal login that allows unauthenticated attackers to redirect authenticated victims to attacker-controlled external URLs by injecting a malicious value into the intended query parameter. Attackers can craft a client login link with an external URL in the intended parameter, which is stored in the session without host validation and emitted verbatim via a bare redirect in the ContactLoginController authenticated() handler after the victim completes a legitimate login, enabling phishing attacks. |
