| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix stale rx/tx ops after device removal
RX: an RX_SETUP update(!) for an existing op skipped can_rx_register()
unconditionally, even when a concurrent NETDEV_UNREGISTER had already
torn down its registration (op->rx_reg_dev == NULL). This silently
did not re-enable frame delivery for that updated filter. bcm_rx_setup()
now re-registers in that case, while leaving rx_ops with ifindex = 0
(all CAN devices) which never carry a tracked rx_reg_dev registered as-is.
TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving
tx_ops with an active cyclic transmission re-arming its hrtimer
indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer
prevents the runaway timer and any injection into a later reused ifindex,
since nothing else calls bcm_can_tx() for the op until an explicit
TX_SETUP update re-arms it.
Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops,
the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup()
always rejects ifindex 0, so clearing it would strand the op: neither a
later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could
ever find it again, since both require an exact ifindex match. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: free RNR data on MBSSID mismatch
nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR
entries than MBSSID entries.
The rejected RNR allocation has not been attached to the beacon data yet,
so free it before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The switch port connect path stores
that device in mac->mc_dev and keeps it for the lifetime of the connected
MAC object.
However, the disconnect path only closes the MAC and frees the dpaa2_mac
object. It does not drop the endpoint device reference stored in
mac->mc_dev, so every successful connect leaks that device reference when
the MAC is later disconnected.
Drop the endpoint device reference before freeing the dpaa2_mac object. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-eth: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The Ethernet connect path stores that
device in mac->mc_dev and keeps it for the lifetime of the connected MAC
object.
However, the disconnect path only disconnects and closes the MAC before
freeing the dpaa2_mac object. It does not drop the endpoint device
reference stored in mac->mc_dev, so every successful connect leaks that
device reference when the MAC is later disconnected.
Drop the endpoint device reference after closing the MAC and before
freeing the dpaa2_mac object. |
| In the Linux kernel, the following vulnerability has been resolved:
media: airspy: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
airspy_start_streaming() returned -ENODEV early when the USB device had
been disconnected (s->udev == NULL) without returning any buffers that
buf_queue() had already accepted. Take v4l2_lock first and jump to the
existing err_clear_bit label, which already drains s->queued_bufs via
vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: Fix memory leak in error path of vdec_open
The vdec_open() function previously jumped directly to
err_m2m_release when vdec_init_ctrls() failed, skipping
release of the m2m context. This caused a resource leak.
Fix it by introducing a proper err_m2m_ctx_release label
that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before
releasing the m2m device.
This was identified via kmemleak:
unreferenced object 0xffff0000205d6878 (size 8):
comm "v4l_id", pid 5289, jiffies 4294938580
hex dump (first 8 bytes):
40 d2 49 18 00 00 ff ff @.I.....
backtrace (crc d3204599):
kmemleak_alloc+0xc8/0xf0
__kvmalloc_node_noprof+0x60c/0x850
v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev]
vdec_open+0x1f4/0x788 [meson_vdec]
v4l2_open+0x144/0x460 [videodev]
chrdev_open+0x1ac/0x500
do_dentry_open+0x3f0/0xfe8
vfs_open+0x68/0x320
do_open+0x2d8/0x9a8
path_openat+0x1d0/0x4f0
do_filp_open+0x190/0x380
do_sys_openat2+0xf8/0x1b0
__arm64_sys_openat+0x13c/0x1e8
invoke_syscall+0xdc/0x268
el0_svc_common.constprop.0+0x178/0x258
do_el0_svc+0x4c/0x70 |
| In the Linux kernel, the following vulnerability has been resolved:
media: msi2500: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
msi2500_start_streaming() had five error paths that all hit this trap
and were further tangled by ret-overwriting between calls:
- -ENODEV when the USB device was already disconnected
- -ERESTARTSYS when mutex_lock_interruptible() was interrupted
- msi2500_set_usb_adc() failure: ret was silently overwritten by
the next call (msi2500_isoc_init), so the error was lost entirely
- msi2500_isoc_init() failure: cleanup_queued_bufs was called, but
the function then fell through to msi2500_ctrl_msg() and again
masked the original error by overwriting ret
- msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all,
leaving isoc URBs submitted with no way for the driver to consume
them
Consolidate the error paths into a small goto chain. Every failure
now stops the function, drains the queued-buffer list, and returns
the real error code. The ctrl_msg failure path also rolls back the
preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before
unlocking and draining.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-si476x: Unregister v4l2_device on probe failure
si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2
controls and before registering the video device. If any of those later
steps fails, probe returns through the exit label after freeing only the
control handler.
A failed probe does not call si476x_radio_remove(), so the
v4l2_device_unregister() there is not reached. This leaves the parent
device reference taken by v4l2_device_register() behind on the error path.
Unregister the V4L2 device in the probe error path after freeing the
controls. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32: dcmi: unregister notifier on probe failure
dcmi_graph_init() registers the async notifier before dcmi_probe() toggles
the reset line. If reset_control_assert() or reset_control_deassert()
fails afterwards, probe returns through err_cleanup and the driver core
will not call dcmi_remove().
Unregister the notifier before cleaning it up on that error path,
matching the successful remove path and the V4L2 async notifier lifetime
rules.
[hverkuil: added Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
media: sun4i-csi: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
sun4i_csi_start_streaming() returned -EINVAL when no matching CSI
format could be found, before any setup (scratch buffer allocation,
pipeline start) had been performed. The remaining error paths already
converge on the err_clear_dma_queue label, which calls
return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump
to that label directly: the intermediate err_disable_device /
err_disable_pipeline / err_free_scratch_buffer labels are skipped,
which is correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: unwind v4l2 device registration on probe error
If the vpe_top resource is missing, vpe_probe() returns -ENODEV after
v4l2_device_register() has succeeded. Probe failures do not call the
driver's remove callback, so the v4l2 device remains registered on that
error path.
Route that failure through the existing v4l2_device_unregister() unwind
label, matching the other errors after v4l2_device_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error
path. Switch pmem allocation from devm_kzalloc() to kzalloc() with
explicit kfree() in the free path to match its list-managed lifetime.
Remove the erroneous list_del(&svc_data_mem) which corrupted the list head
on failed lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: only honour the first PT_INTERP
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: hip04: fix RX buffer leak on build_skb failure
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: i740fb: fix potential memory leak in i740fb_probe()
In i740fb_probe(), the memory allocated in fb_videomode_to_modelist()
for modelist is not freed in the error paths. Fix that by calling
fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix misplaced inc of net->cells_outstanding
Fix net->cells_outstanding being incremented before the check for failure
of idr_alloc_cyclic(), leaving the count incremented on error. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: pl353: fix probe resource allocation
During probe(), the devm_ioremap() is called with the parent device
instead of the current one. So when the module is unloaded, the register
area isn't released.
Target the pl35x device in the devm_ioremap() instead of its parent. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tridentfb: fix potential memory leak in trident_pci_probe()
In trident_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: topology: fix memory leak in snd_sof_load_topology
When the topology filename contains "dummy" and tplg_cnt is 0, the
function returns -EINVAL directly without freeing the tplg_files
allocated by kcalloc() at line 2497. This leaks memory on every
such topology load attempt.
Fix this by setting ret = -EINVAL and jumping to the out: label,
which already handles the kfree(tplg_files) cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: fix potential memory leak in uvesafb_probe()
Due to an incorrect goto label, memory allocated for modedb and modelist
in uvesafb_vbe_init() is not freed in some error paths. Fix this by
updating the goto label. |
