Export limit exceeded: 219991 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (13147 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72232 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: ensure minimal ethernet header on TX As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes"), it is possible by for a local user with eBPF TC hook access to attach a tc filter which truncates the packet and redirects to an batadv interface. But the code assumes that at least ETH_HLEN bytes are available and thus might read outside of the available buffer. The batadv_interface_tx() must therefore always check itself if enough data is available for the ethernet header and don't rely on min_header_len. | ||||
| CVE-2026-72195 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound attr_off in UpdateResidentValue against data_off In do_action()'s UpdateResidentValue case (fslog.c:3307), lrh->attr_off and lrh->redo_len come from the on-disk LRH. When they satisfy aoff + dlen < attr->res.data_off, the assignment attr->res.data_size = cpu_to_le32(aoff + dlen - data_off); underflows to ~4 GiB (e.g. 0xFFFFFFF9 when aoff=0x10, dlen=1, data_off=0x18). Subsequent code that reads attr->res.data_size to walk the resident attribute payload would then read up to 4 GiB past the 1024-byte MFT record allocation. The existing mi_enum_attr() defense in fs/ntfs3/record.c:287 catches the corrupted data_size on the next attribute walk and fails the mount, but only on the path that walks all attributes. A read site that picks an attribute by name and reads its data_size without re-validating is not covered. Validate aoff against data_off and asize at the source. Reproduced under UML+KASAN on mainline 8d90b09e6741 via pr_warn-only probe: with aoff=0x10 and data_off=0x18, the post-assignment data_size is 0xfffffff9 (mount then fails at -22 from mi_enum_attr). [almaz.alexandrovich@paragon-software.com: clang-formatted the changes] | ||||
| CVE-2026-72192 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: bound to_move in indx_insert_into_root before hdr_insert_head indx_insert_into_root() promotes a full resident $INDEX_ROOT into $INDEX_ALLOCATION and copies all non-last resident root entries into a newly allocated INDEX_BUFFER via hdr_insert_head(). The source byte count 'to_move' is summed from the on-disk resident entry sizes and is independent of the destination buffer size, which comes from root->index_block_size (via indx->index_bits). A crafted NTFS image that keeps a valid, full resident root but shrinks root->index_block_size down to 512 after the root has been populated makes hdr_insert_head() memcpy attacker-controlled resident entry bytes past the end of the kmalloc(1u << indx->index_bits) allocation returned by indx_new(). For a 512-byte destination and a resident root whose non-last entries total 560 bytes, the memcpy overruns by 120 bytes and a following memmove extends the highest written offset to 136 bytes past the allocation. The overflow bytes are a direct copy of on-disk entries (via kmemdup), so they are fully attacker-controlled. The write is reachable from unprivileged open(O_CREAT) on a mounted crafted NTFS image: a single sufficiently long create in a directory whose resident root is already full forces root promotion and triggers the copy. This is a controlled out-of-bounds write of 120-136 bytes past a kmalloc(index_block_size) allocation, with attacker-controlled content. It is a bounded adjacent-heap corruption primitive; it is not an arbitrary-address write. Successful exploitation into a named victim object depends on the surrounding slab layout. Reject the copy at the sink. The destination's INDEX_HDR already reports hdr_total (the payload capacity of the new buffer) and hdr_used (the bytes already consumed by the terminal END entry installed by indx_new()); require that to_move fits in the remaining payload before calling hdr_insert_head(). On mismatch, fail with -EINVAL and mark the filesystem as having a detected on-disk inconsistency, which is the same behaviour as the surrounding validation in this function. | ||||
| CVE-2026-72165 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fix condition in 'nand_select_target()' 'cs' here must be in range [0:nanddev_ntargets[. | ||||
| CVE-2026-72160 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject dinodes with non-canonical i_mode type Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories unconditionally and regular files on non-sparse volumes. The normal read path reports these through ocfs2_error(), matching the existing suballoc-slot, inline-data, chain-list, and refcount checks. The online filecheck path uses the same structural predicates but keeps its own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(). This patch (of 3): ocfs2_validate_inode_block() currently accepts any non-zero i_mode value. ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file iops; an unrecognised type falls through to ocfs2_special_file_iops and init_special_inode(). Reject dinodes whose type bits do not name one of the seven canonical POSIX file types. Use fs_umode_to_ftype(), the same generic file-type conversion helper OCFS2 already uses for directory entries, so the accepted inode type set matches the kernel file-type vocabulary instead of open-coding a local switch. Apply the same structural check to the online filecheck read path. filecheck keeps its own error namespace, so it reports malformed i_mode through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(), but it must not allow a malformed dinode to proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72136 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72129 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). | ||||
| CVE-2026-108128 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-16 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-108127 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-16 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-85338 | 1 Microsoft | 18 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 15 more | 2026-10-16 | 7.8 High |
| Out-of-bounds read in Microsoft Graphics Component allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69947 | 1 Microsoft | 17 Windows 10 21h2, Windows 10 21h2, Windows 10 22h2 and 14 more | 2026-10-16 | 6.8 Medium |
| Heap-based buffer overflow in Windows Overlay Filter allows an unauthorized attacker to execute code with a physical attack. | ||||
| CVE-2026-97765 | 1 Microsoft | 14 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 11 more | 2026-10-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-69918 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-10-16 | 8.8 High |
| Heap-based buffer overflow in Windows Core Messaging allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-97014 | 1 Microsoft | 5 365 Apps, Microsoft Office Ltsc 2021, Microsoft Office Ltsc 2024 and 2 more | 2026-10-16 | 5.5 Medium |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. | ||||
| CVE-2026-97761 | 1 Microsoft | 13 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 10 more | 2026-10-16 | 8.8 High |
| Stack-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-97009 | 1 Microsoft | 5 365 Apps, Microsoft Office Ltsc 2021, Microsoft Office Ltsc 2024 and 2 more | 2026-10-16 | 7.8 High |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-70119 | 1 Microsoft | 3 Windows Server 2022, Windows Server 2025, Windows Server 2025 (server Core Installation) | 2026-10-16 | 6.5 Medium |
| Out-of-bounds read in Windows DNS allows an authorized attacker to execute code over a network. | ||||
| CVE-2026-97766 | 1 Microsoft | 14 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 11 more | 2026-10-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-72107 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-relative block number. | ||||
| CVE-2026-72084 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Bound PR-OUT TransportID parsing to the received buffer core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move() hand the raw PERSISTENT RESERVE OUT parameter buffer to target_parse_pr_out_transport_id() without telling it how many bytes are valid. For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with an unbounded strstr() (and on the error path prints the name with a further unbounded "%s"). An initiator can submit a TransportID whose iSCSI name contains neither a ",i,0x" substring nor a NUL terminator, filling the parameter list to its end, so the scan runs off the end of the buffer. When the parameter list spans more than one page the buffer is a multi-page vmap (transport_kmap_data_sg()), so the over-read walks into the trailing vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It is reachable by any fabric that delivers a PR OUT to a device exported through an iSCSI TPG, including a guest via vhost-scsi. Pass the number of received bytes down to the parser and validate the iSCSI TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up front: reject it if it is below the spc4r17 minimum or larger than the received buffer, then bound the separator search, the ISID walk and the name copy by that length. This is the length check the callers already perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len against tpdl, core_scsi3_emulate_register_and_move() validates it against data_length), moved ahead of the scan. Also drop the unbounded "%s" of the unterminated name. Add per-format explicit name-length checks before copying into i_str, rather than silently truncating with min_t: for FORMAT CODE 00b reject if the descriptor body (tid_len - 4 bytes) cannot fit in i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion (from &buf[4] up to the separator) cannot fit. Both checks make the bounds intent explicit at each format branch. While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x" separator sits at the very end of the descriptor: that leaves an empty ISID and points the returned port nexus pointer at buf + tid_len, one past the descriptor, which the registration code (__core_scsi3_locate_pr_reg(), __core_scsi3_alloc_registration()) then dereferences as the ISID string -- the same over-read of the parameter buffer for a malformed descriptor. | ||||