| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959. |
| Linux distributions that have not patched their long-term kernels with https://git.kernel.org/linus/a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (committed on April 14, 2015). This kernel vulnerability was fixed in April 2015 by commit a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (backported to Linux 3.10.77 in May 2015), but it was not recognized as a security threat. With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary. |
| The rds_page_copy_user function in net/rds/page.c in the Reliable Datagram Sockets (RDS) protocol implementation in the Linux kernel before 2.6.36 does not properly validate addresses obtained from user space, which allows local users to gain privileges via crafted use of the sendmsg and recvmsg system calls. |
| Apache Log4cxx's XMLLayout https://logging.apache.org/log4cxx/1.7.0/classlog4cxx_1_1xml_1_1XMLLayout.html , in versions before 1.7.0, fails to sanitize characters forbidden by the XML 1.0 specification https://www.w3.org/TR/xml/#charsets in log messages, NDC, and MDC property keys and values, producing invalid XML output. Conforming XML parsers must reject such documents with a fatal error, which may cause downstream log processing systems to drop or fail to index affected records.
An attacker who can influence logged data can exploit this to suppress individual log records, impairing audit trails and detection of malicious activity.
Users are advised to upgrade to Apache Log4cxx 1.7.0, which fixes this issue. |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 146, Firefox ESR 140.6, Thunderbird 146, and Thunderbird 140.6. |
| Due to insufficient escaping of the newline character in the “Copy as cURL” feature, an attacker could trick a user into using this command, potentially leading to local code execution on the user's system. This vulnerability was fixed in Firefox 139, Firefox ESR 115.24, Firefox ESR 128.11, Thunderbird 139, and Thunderbird 128.11. |
| Firefox could have incorrectly parsed a URL and rewritten it to the youtube.com domain when parsing the URL specified in an `embed` tag. This could have bypassed website security checks that restricted which domains users were allowed to embed. This vulnerability was fixed in Firefox 140, Firefox ESR 128.12, Thunderbird 140, and Thunderbird 128.12. |
| Memory safety bugs present in Firefox ESR 115.26, Firefox ESR 128.13, Thunderbird ESR 128.13, Firefox ESR 140.1, Thunderbird ESR 140.1, Firefox 141 and Thunderbird 141. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 142, Firefox ESR 115.27, Firefox ESR 128.14, Firefox ESR 140.2, Thunderbird 142, Thunderbird 128.14, and Thunderbird 140.2. |
| Memory safety bugs present in Firefox 141 and Thunderbird 141. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 142 and Thunderbird 142. |
| Memory safety bugs present in Firefox ESR 140.5, Thunderbird ESR 140.5, Firefox 145 and Thunderbird 145. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 146, Firefox ESR 140.6, Thunderbird 146, and Thunderbird 140.6. |
| Memory safety bugs present in Firefox 138, Thunderbird 138, Firefox ESR 128.10, and Thunderbird 128.10. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 139, Firefox ESR 128.11, Thunderbird 139, and Thunderbird 128.11. |
| Memory safety bug present in Firefox ESR 128.10, and Thunderbird 128.10. This bug showed evidence of memory corruption and we presume that with enough effort this could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox ESR 128.11 and Thunderbird 128.11. |
| An attacker was able to perform memory corruption in the GMP process which processes encrypted media. This process is also heavily sandboxed, but represents slightly different privileges from the content process. This vulnerability was fixed in Firefox 142, Firefox ESR 115.27, Firefox ESR 128.14, Firefox ESR 140.2, Thunderbird 142, Thunderbird 128.14, and Thunderbird 140.2. |
| Memory safety bugs present in Firefox ESR 140.1, Thunderbird ESR 140.1, Firefox 141 and Thunderbird 141. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 142, Firefox ESR 140.2, Thunderbird 142, and Thunderbird 140.2. |
| A vulnerability was identified in Tenda TX9 up to 22.03.02.10_multi. Affected by this issue is the function sub_4223E0 of the file /goform/setMacFilterCfg. Such manipulation of the argument deviceList leads to buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used. |
| A vulnerability was determined in janet-lang janet up to 1.40.1. This impacts the function janetc_if of the file src/core/specials.c. Executing a manipulation can lead to out-of-bounds read. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. This patch is called c43e06672cd9dacf2122c99f362120a17c34b391. It is advisable to implement a patch to correct this issue. |
| FileRise is a self-hosted web file manager / WebDAV server. Prior to 3.3.0, an HTML Injection vulnerability allows an authenticated user to modify the DOM and add e.g. form elements that call certain endpoints or link elements that redirect the user on active interaction. This vulnerability is fixed in 3.3.0. |
