| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix transport device teardown lookup
SCMI transport devices are deliberately excluded from normal SCMI bus
matching so protocol drivers cannot bind to the internal transport
children. However, scmi_device_destroy() uses the same protocol/name
lookup to find devices that must be unregistered during channel teardown.
Split the match helper so driver matching still skips transport devices,
while explicit child lookup can find them for teardown. Use a shared
transport-device name prefix macro for both matching and name generation.
Since transport-device names are derived from direction and protocol ID,
reject duplicate protocol channel setup before creating or finding a
transport device. This prevents malformed firmware with duplicate
protocol child nodes from reusing an existing transport device and then
destroying it when the duplicate IDR insertion fails. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix use after free in ib_query_qp()
When querying a QP via the netlink flow the only synchronization
mechanism for the said QP is rdma_restrack_get(), meanwhile during the
QP destroy path rdma_restrack_del() is called at the end of the
ib_destroy_qp_user() function which is too late, since by then the
vendor specific resources for said QP would already be destroyed, and
till the rdma_restrack_del() is called this QP can still be accessed,
which could cause the use after free below.
Fix this by moving the rdma_restrack_begin_del() to the start of the
ib_destroy_qp_user(), which in turn waits for all usages of the QP to be
done then removes it from the database to prevent access to it while it
is being destroyed.
RIP: 0010:ib_query_qp+0x15/0x50 [ib_core]
Code: 48 83 05 5d 8e b9 ff 01 eb b5 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 c7 46 40 00 00 00 00 48 c7 46 78 00 00 00 00 <48> 8b 07 48 8b 80 88 01 00 00 48 85 c0 74 1a 48 83 05 54 91 b9 ff
RSP: 0018:ff11000108a8f2f0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ff11000108a8f370 RCX: ff11000108a8f370
RDX: 0000000000000000 RSI: ff11000108a8f3d8 RDI: 0000000000000000
RBP: ff1100010de5a000 R08: 0000000000000e80 R09: 0000000000000004
R10: ff110001057a604c R11: 0000000000000000 R12: ff11000108a8f370
R13: ff110001090e8000 R14: 0000000000000000 R15: ff110001057a602c
FS: 00007f2ffd8db6c0(0000) GS:ff110008dc90b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010b9a7004 CR4: 0000000000373eb0
Call Trace:
<TASK>
mlx5_ib_gsi_query_qp+0x21/0x50 [mlx5_ib]
mlx5_ib_query_qp+0x689/0x9d0 [mlx5_ib]
ib_query_qp+0x35/0x50 [ib_core]
fill_res_qp_entry_query.isra.0+0x47/0x280 [ib_core]
? __wake_up+0x40/0x50
? netlink_broadcast_filtered+0x15a/0x550
? kobject_uevent_env+0x562/0x710
? ep_poll_callback+0x242/0x270
? __nla_put+0xc/0x20
? nla_put+0x28/0x40
? nla_put_string+0x2e/0x40 [ib_core]
fill_res_qp_entry+0x138/0x190 [ib_core]
res_get_common_dumpit+0x4a5/0x800 [ib_core]
? fill_res_qp_entry_query.isra.0+0x280/0x280 [ib_core]
nldev_res_get_qp_dumpit+0x1e/0x30 [ib_core]
netlink_dump+0x16f/0x450
__netlink_dump_start+0x1ce/0x2e0
rdma_nl_rcv_msg+0x1d3/0x330 [ib_core]
? nldev_res_get_qp_raw_dumpit+0x30/0x30 [ib_core]
rdma_nl_rcv_skb.constprop.0.isra.0+0x108/0x180 [ib_core]
rdma_nl_rcv+0x12/0x20 [ib_core]
netlink_unicast+0x255/0x380
? __alloc_skb+0xfa/0x1e0
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x1e8/0x230
? copy_msghdr_from_user+0xea/0x170
___sys_sendmsg+0x7c/0xb0
? __futex_wait+0x95/0xf0
? __futex_wake_mark+0x40/0x40
? futex_wait+0x67/0x100
? futex_wake+0xac/0x1b0
__sys_sendmsg+0x5f/0xb0
do_syscall_64+0x55/0xb90
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: drain QP references after partial table insertion
mana_table_store_ud_qp() publishes a QP at its send-queue id before
inserting the receive-queue id, dropping the XArray lock between the two
xa_insert_irq() calls. A concurrent completion handler can look up the QP
and take a transient reference. When the second insertion fails, the
rollback erased only the send-queue entry and returned, leaving both the
initial table reference and the transient reference outstanding while RDMA
core frees the QP, causing a use-after-free.
Drain the reference as normal destruction does: drop the initial reference
and wait for qp->free, releasing the QP only after every concurrent lookup
returns its reference. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs
tegra241_cmdqv_remove() tears each VINTF down first, then calls free_irq().
Tearing a VINTF down frees vintf0 and clears cmdqv->vintfs[0]. An error in
that window makes tegra241_cmdqv_isr() read the stale slot and hand it to
tegra241_vintf0_handle_error(), which dereferences a NULL or freed pointer.
Free the IRQ before tearing the VINTFs down. free_irq() waits for in-flight
handlers to finish and blocks new ones, so no ISR can observe a VINTF as it
is torn down.
Note: a user-owned VINTF (viommu) could outlive this teardown, which unmaps
cmdqv->base and frees cmdqv->vintfs, so a later viommu close then touches
freed memory. This is neither introduced nor fixed here: a physical IOMMU
is not a pluggable device, so iommufd by design holds no reference on the
one behind a viommu, and this teardown is not expected while that viommu is
still alive. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: free EINT resources on unbind
mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for
every EINT line and installs a chained handler on the parent interrupt,
but none of these are ever released. This was harmless while the drivers
were built-in, but now that they can be built as modules and
unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings
whose chip data points at freed memory, and a chained handler that keeps
firing into that freed data.
The plain allocations in mtk_eint_do_init() already use the device-managed
devm_*() helpers, so tear the remaining resources down the same way:
register a devm action that detaches the chained handler, waits for any
in-flight handler to finish, disposes of the per-line mappings and removes
the IRQ domain. This mirrors the device-managed lifecycle adopted for the
GPIO chip and keeps the whole EINT setup self-cleaning on unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix ext PHY use-after-free on register error path
After mt7915_register_ext_phy() succeeded, a failure of the main PHY
mt7915_init_debugfs() or mt7915_coredump_register() unwound through
free_phy2, which called ieee80211_free_hw() on the ext PHY hw while it
was still registered with mac80211, since mt76_unregister_device() only
unregisters the main hw. Unregister the ext PHY (thermal + phy + hw)
first and skip the redundant free. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: isp1704_charger: cancel work on remove
The USB notifier and initial VBUS detection can schedule isp->work. The
remove path unregisters the notifier and power supply, but does not wait
for queued or running work before tearing down the power supply state.
Cancel the work after unregistering the notifier. Do this before
unregistering the power supply.
This issue was found by a static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: clear cdev pointer after cdev_add() failure
tty_cdev_add() drops the cdev reference when cdev_add() fails, but
leaves driver->cdevs[index] pointing to freed memory.
tty_unregister_device() later passes that stale pointer to cdev_del(),
causing a use-after-free.
Clear the slot after dropping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: prevent create failure bitmap UAF
llbitmap_create() publishes mddev->bitmap before reading the bitmap
superblock. This is needed because llbitmap_read_sb() can initialize a
new bitmap and flush it through helpers that use mddev->bitmap.
If llbitmap_read_sb() fails, the old cleanup dropped bitmap_info.mutex
and freed llbitmap before clearing mddev->bitmap. Readers such as
/proc/mdstat rely on bitmap_info.mutex to keep the bitmap pointer stable
while collecting bitmap stats, so they could observe the stale pointer
after the failed create path released the mutex.
Clear mddev->bitmap while still holding bitmap_info.mutex, then free the
failed llbitmap after dropping the mutex. This makes mutex-protected
readers see either a live bitmap or no bitmap. |
| In the Linux kernel, the following vulnerability has been resolved:
md: wait for behind writes before destroying bitmap
__md_stop() destroyed the bitmap before calling mddev_detach(). That made
mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap
was already disconnected from mddev.
This was still safe for the legacy bitmap because bitmap_destroy() waits
for behind writes itself. llbitmap keeps that wait in its
->wait_behind_writes() operation instead, while ->destroy() tears down the
llbitmap storage. With the old ordering, RAID1 behind-write completions
could still run after llbitmap storage had been freed.
Call mddev_detach() before md_bitmap_destroy() so the common detach path
can wait for behind writes while the bitmap is still alive. Only destroy
the bitmap after those users are gone. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: free vif links after clearing wcid entries on full reset
mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu
while dev->wcid[] still holds pointers to the wcid embedded in each
freed link; mt76_reset_device() then dereferences those entries and
runs mt76_wcid_cleanup() on them. If a grace period elapses in between,
the cleanup operates on freed memory.
Run mt76_reset_device() first, so the wcid entries are cleaned up and
cleared while the links are still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement
The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure
for_each_child_of_node_scoped() releases the node reference on scope
exit, so the explicit of_node_put(np) in the devm_phy_create() error
path drops it twice.
Drop the redundant of_node_put() and let the scoped cleanup handle it. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix use-after-free in snd_card_do_free()
A use-after-free was detected in snd_card_do_free() when a sound card
managed by devres is unbound while a user-space application still holds an
open file descriptor.
For managed cards, the memory is allocated using devres_alloc(), and its
release function is set to __snd_card_release(), which calls
snd_card_free(). When the device is unbound, the unbind thread calls
snd_card_free(), which drops a reference to the card's device. If the user
thread still has an open file descriptor, the reference count does not
reach zero, and the unbind thread blocks on wait_for_completion(&released).
When the user thread closes the file descriptor, it drops the final
reference, invoking the device release callback release_card_device(),
which calls snd_card_do_free(). snd_card_do_free() performs cleanup and
calls complete(card->release_completion). This wakes up the unbind thread,
which returns from snd_card_free() and __snd_card_release(). The devres
core then immediately frees the memory block containing the snd_card
structure.
Meanwhile, the user thread continues execution in snd_card_do_free() and
evaluates `if (!card->managed)`. It reads the `managed` boolean from the
snd_card structure that was just freed by the unbind thread, triggering a
KASAN use-after-free.
Fix this by caching the value of card->managed in a local variable before
calling complete(). This ensures that the card pointer is not dereferenced
after the unbind thread has been woken up and potentially freed the card.
BUG: KASAN: use-after-free in snd_card_do_free sound/core/init.c:604
[inline]
BUG: KASAN: use-after-free in release_card_device+0x1ab/0x1b0
sound/core/init.c:153
Read of size 1 at addr ffff8881912ec909 by task syz-executor130/5857
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description+0x55/0x1e0 mm/kasan/report.c:378
print_report+0x58/0x70 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
snd_card_do_free sound/core/init.c:604 [inline]
release_card_device+0x1ab/0x1b0 sound/core/init.c:153
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
snd_card_file_remove+0x331/0x390 sound/core/init.c:1125
snd_pcm_release+0x12c/0x160 sound/core/pcm_native.c:2986
__fput+0x418/0xa50 fs/file_table.c:512
fput_close_sync+0x11f/0x240 fs/file_table.c:617
__do_sys_close fs/open.c:1511 [inline]
__se_sys_close fs/open.c:1496 [inline]
__x64_sys_close+0x7e/0x110 fs/open.c:1496
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: update queue NAPI association on queue reset
In netdevsim, receive queues (struct nsim_rq) embed their own struct
napi_struct. When queue reset is performed (e.g. via queue_reset
debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq,
and nsim_queue_mem_free() later deletes and frees the old one.
However, nsim_queue_start() failed to update the queue-to-NAPI mapping
via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to
point to the old NAPI struct. After the old queue was freed, a subsequent
queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN
slab-use-after-free read in nla_put_napi_id() when accessing
rxq->napi->napi_id.
Fix this by calling netif_queue_set_napi() in nsim_queue_start() to
associate the new NAPI with the RX queue, and clear the association
with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown. |
| Use after free in Windows Device Association Service allows an authorized attacker to elevate privileges locally. |
| Info-ZIP Zip 3.0, when the -T and -TT command-line options are used, allows attackers to cause a denial of service (invalid free and application crash) or possibly have unspecified other impact because of an off-by-one error. NOTE: it is unclear whether there are realistic scenarios in which an untrusted party controls the -TT value, given that the entire purpose of -TT is execution of arbitrary commands |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: fix premature region free on failed OP_UNMAP_SPARSE
In nouveau_uvmm_bind_job_submit()'s OP_UNMAP_SPARSE arm, op->reg is set
from nouveau_uvma_region_find(), which only looks the region up and takes
no reference; a region's sole reference is its membership in
uvmm->region_mt. Two failure paths leave op->reg set: the -ENOENT check
when the region is busy, and the drm_gpuvm_sm_unmap_ops_create() failure.
The sibling nouveau_uvmm_sm_unmap_prepare() failure just below clears
op->reg; these two do not.
unwind_continue steps back one op, so the failing op is skipped by the
unwind loop and its op->reg stays set. nouveau_uvmm_bind_job_cleanup()
then enters its if (op->reg) branch and calls nouveau_uvma_region_remove()
and nouveau_uvma_region_put() on it, dropping the tree's sole reference
and freeing a region this job never created. The comment above the
cleanup loop documents the broken invariant: op->reg must be NULL on
submit failure.
This frees a live region on an unrelated failure, reachable single-job
when drm_gpuvm_sm_unmap_ops_create() returns -ENOMEM; if another job owns
the same region, its cleanup then removes and puts the freed region, a
use-after-free. Clear op->reg on both failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix folio_nr_pages() race after put in large folio invalidate
Our v6.18 based Android system is continuely suffering livelock and bad
page stat as shown in[1] which related to broken xarray slot status. By
investigating big folio operations within f2fs, we find below races and
fix it by get the nr_pages before drop the refcount and folio_lock.
f2fs_get_read_data_folio() calls f2fs_folio_put() before
folio_nr_pages() when invalidating a large folio from the page cache.
That unlocks the folio and drops the caller reference, leaving a window
where a concurrent truncate or folio split can shrink the compound folio
or free it before the invalidate range is computed. An undersized range
then leaves split sub-folios in mapping->i_pages, which can later
interact badly with truncate and reclaim (stale xarray entries and bad
page state when folio->mapping no longer matches the mapping being
truncated).
[1]
PID: 2594 TASK: ffffff8169b81580 CPU: 7 COMMAND: "Thread-3"
#0 [ffffffc08ef2b8a0] xas_load at ffffffe52d1f42a4
#1 [ffffffc08ef2b900] find_get_entries at ffffffe52c185798
#2 [ffffffc08ef2bb60] truncate_inode_pages_range at ffffffe52c19e83c
#3 [ffffffc08ef2bbc0] truncate_inode_pages_final at ffffffe52c19ec2c
#4 [ffffffc08ef2bc20] f2fs_evict_inode at ffffffe52c4c8400
#5 [ffffffc08ef2bcc0] evict at ffffffe52c2de9f4
#6 [ffffffc08ef2bd00] iput at ffffffe52c2db1b4
#7 [ffffffc08ef2bd30] dentry_unlink_inode at ffffffe52c2d7204
#8 [ffffffc08ef2bd50] __dentry_kill at ffffffe52c2d3dcc
#9 [ffffffc08ef2bd80] dput at ffffffe52c2d3c3c
#10 [ffffffc08ef2bda0] __fput at ffffffe52c2b0a7c
#11 [ffffffc08ef2bde0] ____fput at ffffffe52c2b1034
#12 [ffffffc08ef2bdf0] task_work_run at ffffffe52beea200
#13 [ffffffc08ef2be20] exit_to_user_mode_loop at ffffffe52bfbc17c
#14 [ffffffc08ef2be80] el0_svc at ffffffe52d1f8e54
#15 [ffffffc08ef2beb0] el0t_64_sync_handler at ffffffe52d1f8d10 |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov7740: fix use-after-destroy in remove
The ov7740_remove() function had a severe teardown order bug where it
destroyed the driver's mutex before freeing the V4L2 control handler
which relies on that mutex, leading to a use-after-destroy kernel panic.
Furthermore, the driver explicitly called v4l2_ctrl_handler_free() and
mutex_destroy() sequentially, but then called ov7740_free_controls()
which invokes both of them a second time, resulting in a double-free.
This patch fixes the issue by unregistering the subdevice first, and
relying exclusively on ov7740_free_controls() to safely tear down the
mutex and control handler in the correct order. |
