| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HDF5 through 2.2.0 contains an uninitialized memory read vulnerability in H5Z__filter_scaleoffset() in src/H5Zscaleoffset.c. The decode path validates reads against the allocated size of the chunk buffer rather than the number of bytes actually read from the file. Because H5D__chunk_lock() deliberately sizes filtered chunk buffers to the larger of the stored and unfiltered chunk sizes and fills only the stored bytes, a truncated chunk passes these bounds checks and is decompressed from the uninitialized remainder of the allocation. Unrelated heap contents are then returned to the caller as dataset data. Because the reads remain within the allocation, the issue is not detected by AddressSanitizer. An attacker who can get a user or application to read a dataset from a crafted HDF5 file can cause disclosure of process memory. This issue exists because of an incomplete fix for CVE-2026-19029. |
| A flaw was found in SSSD. The sss_nss_protocol_fill_initgr() function in the NSS responder pre-allocates reply space for all group entries but does not shrink the packet when groups are skipped, causing uninitialized heap bytes to be transmitted to the client. A local attacker can exploit this to disclose cached directory data and heap layout information from the sssd_nss process. |
| A flaw was found in Samba, in the vfs_streams_xattr module, where uninitialized heap memory could be written into alternate data streams. This allows an authenticated user to read residual memory content that may include sensitive data, resulting in an information disclosure vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus_rog_ryujin) Validate HID report lengths
rog_ryujin_raw_event() parses response headers and payload fields without
first checking that they are present in the received report. A short report
can therefore make the driver consume uninitialized bytes from the HID
transport buffer and expose them as sensor values through sysfs.
Validate the response header and the fields used by each response type
before parsing them. |
| SEPPmail Secure Email Gateway before 15.1.1 does not neutralize LDAP metacharacters in an unauthenticated account-selection input in its GINA web interface. A remote unauthenticated attacker can enumerate email addresses. |
| A vulnerability was found in pkcs15-init in OpenSC. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
Insufficient or missing checking of return values of functions leads to unexpected work with variables that have not been initialized. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
Insufficient or missing checking of return values of functions leads to unexpected work with variables that have not been initialized. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
The following problems were caused by insufficient control of the response APDU buffer and its length when communicating with the card. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK.
The problem is missing initialization of variables expected to be initialized (as arguments to other functions, etc.). |
| A flaw was found in the SFTP backend in gvfs. When mounting a share, a malicious SFTP server can cause read_string() to allocate a buffer with a certain length but the function does not verify that the buffer is completely filled, leaving the remainder of the buffer containing uninitialized heap contents. If the server sends a short FXP_HANDLE reply, these uninitialized bytes are taken as the file handle. The client will then echo these uninitialized bytes back to the server on all subsequent requests using that handle. With a length of 128 bytes, this issue allows the malicious server to deterministically read uninitialized heap memory from the gvfsd-sftp process, leaking its heap base and the load address of the libgio library, resulting in a deterministic defeat of Address Space Layout Randomization (ASLR). |
| Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. From 2.4.2 through 2.8.5, ippon_command in drivers/blazer_usb.c partially initializes char tmp[64] with a short Megatec status query and then passes a fixed eight-byte chunk to usb_control_msg. A malicious firmware-controlled USB device presenting the Mustek Powermust VID 0x06da and Mustek Powermust PID 0x0003 matches blazer_usb_id, selects ippon_subdriver, and can receive the uninitialized trailing stack bytes during normal polling. The disclosure is bounded and read-only, requires physical or supply-chain access to the USB bus, and has no established integrity or availability impact. This issue is scheduled to be fixed in version 2.8.6. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Initialize free_qp completion before using it
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/entry: Scrub r12 register on kernel entry
Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"),
all entry handlers loaded r12 with the current task pointer
(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That
commit removed TIF_ISOLATE_BP, dropping both the branch prediction
macros and the r12 load, but did not add r12 to the register clearing
sequence.
Add the missing xgr %r12,%r12 to make the register scrub consistent
across all entry points. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
__build_packet_message() manually constructs the NFULA_PAYLOAD netlink
attribute using skb_put() and skb_copy_bits(), bypassing the standard
nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes
are allocated (including NLA alignment padding), only data_len bytes
of actual packet data are copied. The trailing nla_padlen(data_len)
bytes (1-3 when data_len is not 4-byte aligned) are never initialized,
leaking stale heap contents to userspace via the NFLOG netlink socket.
Replace the manual attribute construction with nla_reserve(), which
handles the tailroom check, header setup, and padding zeroing via
__nla_reserve(). The subsequent skb_copy_bits() fills in the payload
data on top of the properly initialized attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
process_sdp() declares union nf_inet_addr rtp_addr on the stack and
passes it to the nf_nat_sip sdp_session hook after walking the SDP
media descriptions. However rtp_addr is only initialized inside the
media loop when a recognized media type with a non-zero port is found.
If the SDP body contains no m= lines, only inactive media sections
(m=audio 0 ...) or only unrecognized media types, rtp_addr is never
assigned. Despite that, the function still calls hooks->sdp_session()
with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack
value as an IP address and rewrite the SDP session owner and connection
lines with it.
With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this
results in the session-level o= and c= addresses being rewritten to
0.0.0.0 for inactive SDP sessions. Without stack auto-init the
rewritten address is whatever happened to be on the stack.
Fix this by pre-initializing rtp_addr from the session-level connection
address (caddr) when available, and tracking via a have_rtp_addr flag
whether any valid address was established. Skip the sdp_session hook
entirely when no valid address exists. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix error handling in slot reset
If the device has not recovered after slot reset is called, it goes to
out label for error handling. There it could make decision based on
uninitialized hive pointer and could result in accessing an uninitialized
list.
Initialize the list and hive properly so that it handles the error
situation and also releases the reset domain lock which is acquired
during error_detected callback.
(cherry picked from commit bb71362182e59caa227e4192da5a612b09349696) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah()
struct irdma_create_ah_resp { // 8 bytes, no padding
__u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx)
__u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK
};
rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata().
The reserved members of the structure were not zeroed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix oops due to uninitialised var in smb2_unlink()
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst. |
