Export limit exceeded: 203970 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (987 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-123128 | 2026-11-09 | N/A | ||
| The GemBooking WordPress plugin before 1.7.1 does not serialise concurrent booking requests per team member, allowing unauthenticated users to create overlapping confirmed bookings for the same team member across different bookable items by sending simultaneous requests. | ||||
| CVE-2026-115204 | 1 Wordpress-extensions | 1 Azexo Store Locator | 2026-11-09 | N/A |
| The AZEXO Store Locator WordPress plugin through 1.4 does not perform capability or nonce checks on its AJAX actions and does not sanitise a request header used to build a file path, allowing any authenticated user such as a subscriber to write a file with an arbitrary name, location, and content, leading to remote code execution. | ||||
| CVE-2026-76500 | 1 Cisco | 1 Application Policy Infrastructure Controller (apic) | 2026-11-07 | 9.8 Critical |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Application Policy Infrastructure Controller (APIC) engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76500 are related to issues with improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. | ||||
| CVE-2026-76467 | 1 Cisco | 4 Campus Gateway Software, Meraki Mr Wireless Access Point Software, Meraki Mv Firmware and 1 more | 2026-11-07 | 7.5 High |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco networking engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76467 are related to issues concerning improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. | ||||
| CVE-2026-76282 | 1 Splunk | 2 Splunk, Splunk Enterprise | 2026-11-07 | 8.8 High |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76282 are related to improper control of a resource through its lifetime and are grouped under the Common Weakness Enumeration (CWE) CWE-664. | ||||
| CVE-2023-5088 | 2 Qemu, Redhat | 4 Qemu, Advanced Virtualization, Enterprise Linux and 1 more | 2026-11-07 | 6.4 Medium |
| A bug in QEMU could cause a guest I/O operation otherwise addressed to an arbitrary disk offset to be targeted to offset 0 instead (potentially overwriting the VM's boot code). This could be used, for example, by L2 guests with a virtual disk (vdiskL2) stored on a virtual disk of an L1 (vdiskL1) hypervisor to read and/or write data to LBA 0 of vdiskL1, potentially gaining control of L1 at its next reboot. | ||||
| CVE-2023-4910 | 1 Redhat | 2 3scale, 3scale Api Management | 2026-11-07 | 5.5 Medium |
| A flaw was found In 3Scale Admin Portal. If a user logs out from the personal tokens page and then presses the back button in the browser, the tokens page is rendered from the browser cache. | ||||
| CVE-2023-3972 | 1 Redhat | 24 Enterprise Linux, Enterprise Linux Aus, Enterprise Linux Desktop and 21 more | 2026-11-07 | 7.8 High |
| A vulnerability was found in insights-client. This security issue occurs because of insecure file operations or unsafe handling of temporary files and directories that lead to local privilege escalation. Before the insights-client has been registered on the system by root, an unprivileged local user or attacker could create the /var/tmp/insights-client directory (owning the directory with read, write, and execute permissions) on the system. After the insights-client is registered by root, an attacker could then control the directory content that insights are using by putting malicious scripts into it and executing arbitrary code as root (trivially bypassing SELinux protections because insights processes are allowed to disable SELinux system-wide). | ||||
| CVE-2023-3750 | 1 Redhat | 4 Advanced Virtualization, Enterprise Linux, Libvirt and 1 more | 2026-11-07 | 6.5 Medium |
| A flaw was found in libvirt. The virStoragePoolObjListSearch function does not return a locked pool as expected, resulting in a race condition and denial of service when attempting to lock the same object from another thread. This issue could allow clients connecting to the read-only socket to crash the libvirt daemon. | ||||
| CVE-2026-122124 | 1 Yealink | 1 Uvc40 E2 | 2026-11-06 | 6.1 Medium |
| On Yealink UVC40 E2 devices before 319.410.0.71, an attacker with short-term physical access can steal Wi‑Fi credentials via the USB interface. Sensitive data within the firmware configuration can be abused to gain root privileges on the device. Within Wi‑Fi coverage, the attacker may perform audio and video eavesdropping with no LED alert from the device. | ||||
| CVE-2026-123010 | 1 Twilio-labs | 1 Netlify-okta-auth | 2026-11-06 | 7.2 High |
| @twilio-labs/netlify-okta-auth through 1.0.2 relies on an unverified iss claim. This affects an outbound HTTP request to retrieve a public signing key. There may be other impacts in a misconfiguration where oktaUrl isn't set. | ||||
| CVE-2023-33951 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Enterprise Linux For Real Time and 3 more | 2026-11-06 | 6.7 Medium |
| A race condition vulnerability was found in the vmwgfx driver in the Linux kernel. The flaw exists within the handling of GEM objects. The issue results from improper locking when performing operations on an object. This flaw allows a local privileged user to disclose information in the context of the kernel. | ||||
| CVE-2026-80904 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: Fail tls_sw_splice_read() after a failed async decrypt When an async decrypt fails, tls_decrypt_done() records the error in ctx->async_wait.err and calls tls_err_abort(), which stores it in sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read async_wait.err once they hold the reader lock and fail the call: a record that did not authenticate breaks the connection. tls_sw_splice_read() has no such check, and sk_err does not stand in for one. tls_rx_rec_wait() tests sk_err only inside the loop it skips whenever a record is already parsed, and the first reader to reach sock_error() clears it, while async_wait.err persists. A splice therefore keeps delivering records on a connection that recvmsg() and read_sock() refuse to read. Read async_wait.err in tls_sw_splice_read() as the other two readers do. | ||||
| CVE-2026-80808 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: stop retrying saturated xattr cache entries ext4_xattr_block_set() retries when a cache entry selected for reuse has a saturated reference count after taking the buffer lock. The retry returns to the mbcache lookup without making that entry ineligible, so it can select the same unusable entry indefinitely. A task spinning there can hold the parent directory's i_rwsem and leave concurrent rmdir callers blocked. Normally a reusable entry has a reference count below EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are updated under the same buffer lock. A corrupted filesystem can violate that invariant. The syzbot reproducer reports allocator and xattr corruption before triggering this retry loop. Check the untrusted on-disk count before incrementing it, avoiding overflow, and clear MBE_REUSABLE_B when it is already saturated. The next lookup then skips the entry that was just proven unusable. This mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release path marks the entry reusable again on the exact 1024-to-1023 transition. Using the same QEMU harness and guest parameters, current unpatched Linux hung in 6 of 8 420-second trials with the do_rmdir signature; representative NMI backtraces caught the owner spinning in ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials without a hung-task report; the final twelve trials exercised the reviewed overflow-safe form of the change. syzbot's patch testing also completed without reproducing the hang. | ||||
| CVE-2026-72096 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: make error counter atomic The error counter "v->corrupted_errs" was not atomic, thus it could be subject to race conditions. The call to dm_audit_log_target("max-corrupted-errors") may be skipped due to the races. | ||||
| CVE-2026-72063 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: tegra: do not call pinctrl for GPIO direction tegra_gpio_direction_input() and tegra_gpio_direction_output() already program the GPIO controller direction registers directly. The additional pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl operation, because the Tegra pinmux ops provide GPIO request/free handling but no gpio_set_direction hook. The extra call still enters the pinctrl core and takes pctldev->mutex. Shared GPIO users can call the direction path while holding their per-line spinlock, so this otherwise redundant pinctrl direction call can sleep in an atomic context. This was found by our static analysis tool and then confirmed by manual review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the Tegra pinctrl ops. The reviewed path has a default non-sleeping struct gpio_chip while the direction callback still enters the pinctrl mutex path. A directed runtime validation kept the same non-sleeping chip registration and drove: gpio_shared_proxy_direction_output() gpiod_direction_output_raw_commit() tegra_gpio_direction_output() pinctrl_gpio_direction_output() Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output() on the stack. Do not mark the whole chip as can_sleep to paper over this: can_sleep describes whether get()/set() may sleep, and Tegra value access is MMIO. Remove the redundant pinctrl direction calls and keep pinctrl involvement in the existing request/free path. | ||||
| CVE-2026-68396 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: wake eh reliably when using scsi_schedule_eh Drivers which use the scsi_schedule_eh function to run the error handler currently risk the error handler thread never waking once all commands are timed out or inactive. There is no enforced memory order between setting the host into error recovery state and counting busy commands. This can result in a race with scsi_dec_host_busy where neither CPU sees both conditions of all commands inactive and the host error state to request waking the error handler. To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will occur after the error state is globally visible and will be seen by any current scsi_dec_host_busy callers. | ||||
| CVE-2026-68133 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP Call Trace during PTP release If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will result in the following PTP release call trace during driver unload: kernel BUG at lib/list_debug.c:52! ice_ptp_release+0x332/0x3c0 [ice] ice_deinit_features.part.0+0x10e/0x120 [ice] ice_remove+0x100/0x220 [ice] This was observed when passing PF1 through to a VM. ice_ptp_init() fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT. Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and returning without error, preventing the invalid state transition to ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from ICE_PTP_RESETTING after a failed rebuild. | ||||
| CVE-2026-64472 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix racy bitfields and tighten struct layout Bitfield operations are not atomic, they use a read-modify-write pattern, therefore we should be careful not to pack bitfields that can be concurrently updated into the same storage unit. This split takes a binary approach: flags that are only modified pre/post open/close remain bitfields, flags modified from user action, including actions that reach across to another device (ex. reset) use dedicated storage units. Note mlx5_vhca_page_tracker.status is relocated to fill the alignment hole this split exposes. Bitfield justifications: migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe Dedicated storage units: mdev_detach: written in the VF attach/detach event notifier mlx5fv_vf_event() at runtime log_active: written in mlx5vf_start_page_tracker()/ mlx5vf_stop_page_tracker() during runtime dirty tracking deferred_reset: written in mlx5vf_state_mutex_unlock()/ mlx5vf_pci_aer_reset_done() during runtime reset handling is_err: set by tracker error handling and dirty-log polling at runtime object_changed: set by tracker event handling and cleared by dirty-log polling at runtime | ||||
| CVE-2026-64454 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: run gadget disconnect from sleepable suspend context dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls dwc3_disconnect_gadget(). For async callbacks that helper only uses plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback still runs with IRQs disabled and any sleepable callback trips Lockdep. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the dwc3_gadget_suspend() -> dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and Lockdep reported: BUG: sleeping function called from invalid context gadget_disconnect+0x21/0x39 [vuln_msv] dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv] Keep the disconnect callback selection in one common helper, but add a sleepable suspend-side wrapper which snapshots the callback under dwc->lock and then runs it after spin_unlock_irqrestore(). The regular event path still uses the existing spin_unlock()/spin_lock() window. | ||||